 |
 |
|||||||
|
||||||||
 |
|
|||||||
|
||||||||
|
||||||||
 |
||||||||
Why invest in a Leupold® Mark 4® riflescope and then attach it to your rifle with a substandard mount? Leupold’s mounting systems are as rugged and reliable as the Leupold scopes they’re intended to secure. No matter which mount you choose, you can count on it for rock-solid dependability and tack-driving repeatable accuracy.
Leupold
Mount Selector™
Try our Mount Selector to find the perfect Leupold
mount for your application. Just select a Leupold scope and pair it with
your rifle or handgun of choice. The Leupold Mount Selector does the rest.
Visit our Mount
Selector page to get started.
Leupold was first
with Torx®
We were the first mount maker to offer the Torx® drive system.
Unlike old-fashioned hex-head screws, the deep-engaging lobe design
won’t
strip screw heads or distort drivers. The Torx system makes more efficient
use of your driving force so you can tighten screws far more securely,
which translates into increased confidence.
Torx is a registered trademark of CamCar, Inc.
Mark 4 CQ/T
Throw Lever Mount
Get a precise and repeatable zero every time with this quick-detaching mount for the Leupold Mark 4 CQ/T optical sight. With rugged, all-metal construction and a black, anti-glare matte finish, it’s ready to handle any mission. Fits
all MIL-STD-1913/
Picatinny-style rails.
PRESS RELEASE (1/27/05)
Mark 4 CQ/T Flat Top Mounting Bracket
•
Secure your Mark 4 CQ/T scope to any Picatinny-style mounting rail using
this specially designed mounting bracket.
Mark 4 AR-15/M16 Handle Mount
•
Securely attach your scope to any M16 variant with a carrying handle.
• Fit it into the sight channel of the carrying handle
• Delivers rock-solid stability for repeatable accuracy
Leupold Mark 4 Aluminum Rings
In the field, you count every ounce of weight, because you’ve got
to carry it. Mark 4 Aluminum mounts are machined from a single piece
of aircraft-grade aluminum, so they’re incredibly strong, yet lightweight.
PRESS RELEASE (1/27/05)
Mark
4 Tactical Mounts
• System employs a slot and spline design and comes in 1-Piece and 2-Piece configurations.
• Mark 4 bases accept Mark 4 rings, cross-lot rings, and QRW / PRW rings
• Bases have a 1/4-degree slope for long range shooting applications
• Mark 4 Super High rings specifically
designed for use with handle mounting configurations
• Mark 4 bases are available for nearly every long-range tactical weapon in
use, including:
– Remington 700, 721, and 725 long
and short action models
– Winchester Model 70, 670,
770, and 70A
– The Savage 110
through 116
– The Savage 10
through 16
– The Ruger M77
QR Mounts (Quick Release™)
•
Remove and reattach a scope
using our QR™ mount and
return to within
half an inch of
the original
point-of-impact
on the target
• Proven in
extensive testing
• Rear ring is secured by windage adjustment screws
QRW™ (Quick Release
Cross-Slot Format)
• Steel detachable
accuracy mounts
that are based on
the familiar
cross-slot design
• Use the QRW mounts to
achieve detachable accuracy
PRW Rings (Permanent Cross-Slot Format)
•
Steel rings that are based on the proven cross-slot design
• Uses the Leupold QRW bases or any other Picatinny-style mounting rails
Ringmounts
• A high-quality alternative to ringmounts sold by firearms manufacturers and a no-tap mounting method for most .22 rimfire rifles with a 11mm, 13mm, or 3/8" dovetail rail
• Superior integrity and tighter tolerances because we machine them from solid stock
 |
 |
 |
| .22 Rimfire Ringmounts with Dovetail Receivers | Ruger Integral Ringmounts | Sako Dovetail Ringmounts |
Extension Ring Sets
•
Extension rings give you 5/8" of additional ring spacing adjustment,
so you can shorten or lengthen your ring spacing on rifles.
• Extension rings that mount on the front of STD and QR bases are available for 1-inch, 26mm (QR only), and 30mm maintubes.
Rings for Cross-Slot Bases
•
Engineered specifically to match up with cross-slot bases.
• Mount these incredibly stable rings on firearms such as tactical shotguns with built-in mounting rails.